Identify compatible nurse-call support or defined upgrades, with C-TEC conventional/Quantec experience used as a qualification advantage rather than an assumed site specification.
Research edition: 28 September 2026. Contract availability is unconfirmed. This text view includes the published research; working notes remain in the interactive workspace on your device.
Service territory
North of England
Work to prioritise
Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Start here · Acquired
Herncliffe Nursing Home
Summit Care Group · Keighley, West Yorkshire
Programme: Confirm current timetable Source checked: 2026-09-28
Target scope
Identify the existing platform and practical service requirements; offer a supported takeover or defined improvement without presuming replacement.
Why it fits
Christie & Co announced Summit Care Group’s acquisition of Herncliffe Nursing Home in Keighley on 31 May 2026; the home is registered for 115 residents. The core territory match is Keighley. For Hi-Tech Security and Fire, the relevant scope is Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Recommended first move
Use Summit Care Group’s official enquiry form at https://summitcaregroup.co.uk/contact-us/ to request its Herncliffe estates buyer; alternatively ask the home on 01535 681 484 for routing. The home team is not a confirmed procurement lead.
Timing
The sale confirms new ownership, not a supplier review, system failure or capital-works programme. Timing is tied to a stated review date, not the sale announcement.
Qualification questions
Who now owns estates and service procurement for Herncliffe, and is there an agreed review date for this scope?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
Are there approved requirements for call routing, door monitoring or wireless additions, rather than an assumed full replacement?
What are the actual room and asset schedules? The sale reports 115 registered places while the current operator describes 111 bedrooms; neither is an equipment count.
Is there a specific approved requirement, or should any introduction wait until the current agreement is reviewed?
Prepare before contact
Prepare a supported-makes matrix distinguishing installation, servicing and programming permissions.
Prepare an example occupied-home work plan for a limited upgrade or supported maintenance transfer.
Reasons to stop
No service review or approved requirement exists, or an exclusive incumbent agreement prevents another supplier from taking the proposed work.
The installed make, restricted software access or warranty terms prevent the specific maintenance or upgrade proposed.
Published buyer routes
Summit Care Group / Herncliffe
Home team Request Summit's estates buyer and confirm the scope of any supplier review.
Transaction adviser: request operator introduction Request an introduction to the current owner or project team; the adviser is not the procurement buyer.
Review the sender details and selected recipient before sending.
Subject: Herncliffe Nursing Home — nurse-call specification and support
Hello Summit estates team,
We install and maintain nurse-call systems, including C-TEC 800 Series and Quantec, and can assess support for most makes.
Christie & Co announced Summit Care Group’s acquisition of Herncliffe Nursing Home in Keighley on 31 May 2026; the home is registered for 115 residents.
Could you point us to the person responsible for Herncliffe’s estates and supplier appointments? We would like to establish whether this scope is being reviewed or is already covered.
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
If the requirement is already covered, a future review date or the right contact would be helpful.
Kind regards,
Hi-Tech Security and Fire team
info@hi-techsecurityandfire.co.uk
Privacy or contact preferences: reply to this email. Please let us know if you would prefer no further contact.
Next useful trigger
The operator’s stated review date, an approved work requirement or an estates-team introduction.
Logini Croft Limited / Logini Group · Normanton, West Yorkshire
Programme: Confirm current timetable Source checked: 2026-09-28
Target scope
Identify the existing platform and practical service requirements; offer a supported takeover or defined improvement without presuming replacement.
Why it fits
The Croft in Normanton transferred to Logini Croft Limited, according to Christie & Co’s 14 May 2026 announcement; it is registered for 29 residents. The core territory match is Normanton. For Hi-Tech Security and Fire, the relevant scope is Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Recommended first move
Ask Jonathan Wickens via jonathan.wickens@christie.com to forward an introduction to the operator’s estates/development buyer. The adviser is not the purchaser of this work.
Timing
For an occupied 29-place home, define a proportionate assignment and avoid presuming an estate-wide replacement programme. Timing is tied to a stated review date, not the sale announcement.
Qualification questions
Does Logini procure this service for The Croft directly, and is any review or approved work actually planned?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
Are there approved requirements for call routing, door monitoring or wireless additions, rather than an assumed full replacement?
Is there a specific approved requirement, or should any introduction wait until the current agreement is reviewed?
Prepare before contact
Prepare a supported-makes matrix distinguishing installation, servicing and programming permissions.
Prepare an example occupied-home work plan for a limited upgrade or supported maintenance transfer.
Reasons to stop
No service review or approved requirement exists, or an exclusive incumbent agreement prevents another supplier from taking the proposed work.
The installed make, restricted software access or warranty terms prevent the specific maintenance or upgrade proposed.
Published buyer routes
Christie & Co · Jonathan Wickens
Transaction adviser Request an introduction to the current owner or project team; the adviser is not the procurement buyer.
Review the sender details and selected recipient before sending.
Subject: The Croft — nurse-call specification and support
Hi Jonathan,
We install and maintain nurse-call systems, including C-TEC 800 Series and Quantec, and can assess support for most makes.
The Croft in Normanton transferred to Logini Croft Limited, according to Christie & Co’s 14 May 2026 announcement; it is registered for 29 residents.
Would you be willing to forward a short introduction to the person at Logini Croft Limited / Logini Group who handles estates and supplier appointments? We’d like to establish whether this scope is being reviewed, or is already covered.
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
If the requirement is already covered, a future review date or the right contact would be helpful.
Kind regards,
Hi-Tech Security and Fire team
info@hi-techsecurityandfire.co.uk
Privacy or contact preferences: reply to this email. Please let us know if you would prefer no further contact.
Next useful trigger
A named operator buyer or an agreed review date; a sale alone does not justify recurring follow-ups.
Check manufacturer, programming access and warranty restrictions before discussing nurse-call servicing or staff alarm configuration.
Why it fits
Burghley Care’s current page advertises the 74-bed Durham Mount home at Mount Oswald for winter 2026. The core territory match is Durham. For Hi-Tech Security and Fire, the relevant scope is Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Recommended first move
Contact Burghley Care via info@burghleycare.co.uk and request the development/estates lead responsible for this specific scope; the public inbox is not a confirmed buyer.
Timing
This is a near-opening introduction: installation may be committed, so prioritise handover and the operator’s support responsibilities. Ask for the actual buying window before setting a follow-up date.
Qualification questions
Who is coordinating handover and ongoing service procurement for Durham Mount, and what is already included?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
Are there approved requirements for call routing, door monitoring or wireless additions, rather than an assumed full replacement?
What installation warranty, defects support or training is already included at handover?
Prepare before contact
Prepare a supported-makes matrix distinguishing installation, servicing and programming permissions.
Prepare an example occupied-home work plan for a limited upgrade or supported maintenance transfer.
Reasons to stop
The operator/contractor confirms the full relevant scope is committed and is not considering external support.
The installed make, restricted software access or warranty terms prevent the specific maintenance or upgrade proposed.
Published buyer routes
Burghley Care
Group team: ask for estates and maintenance buyer Request the operator development or estates buyer; confirm handover, incumbent agreements and service-review timing.
Review the sender details and selected recipient before sending.
Subject: Durham Mount — nurse-call specification and support
Hello Burghley Care team,
We install and maintain nurse-call systems, including C-TEC 800 Series and Quantec, and can assess support for most makes.
Burghley Care’s current page advertises the 74-bed Durham Mount home at Mount Oswald for winter 2026.
Could you point us to the person responsible for this scope and confirm what is already appointed?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
If the requirement is already covered, a future review date or the right contact would be helpful.
Kind regards,
Hi-Tech Security and Fire team
info@hi-techsecurityandfire.co.uk
Privacy or contact preferences: reply to this email. Please let us know if you would prefer no further contact.
Next useful trigger
Confirmed handover, actual opening or the operator’s agreed service-review date.
Confirm the specified nurse-call platform and package buyer; offer relevant C-TEC or other supported-system competence only after that check.
Why it fits
Wrightcare describes Brindlewood in Grimsargh as a 72-bedroom home under construction, targeting residents moving in during summer 2027. The core territory match is Grimsargh. For Hi-Tech Security and Fire, the relevant scope is Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Recommended first move
Contact Wrightcare via info@wrightcare.co.uk and request the development/estates lead responsible for this specific scope; the public inbox is not a confirmed buyer.
Timing
The operator’s page does not name the principal contractor or trade buyer. Ask for the actual buying window before setting a follow-up date.
Qualification questions
Who has Wrightcare appointed to buy the relevant trade package or operational service for Brindlewood?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
Are there approved requirements for call routing, door monitoring or wireless additions, rather than an assumed full replacement?
Has this exact package been awarded, and what evidence is needed before a new supplier can be considered?
Prepare before contact
Prepare a supported-makes matrix distinguishing installation, servicing and programming permissions.
Prepare an example occupied-home work plan for a limited upgrade or supported maintenance transfer.
Reasons to stop
The operator/contractor confirms the full relevant scope is committed and is not considering external support.
The installed make, restricted software access or warranty terms prevent the specific maintenance or upgrade proposed.
Published buyer routes
Wrightcare
Operator: ask for development procurement Request the operator development or estates buyer; confirm handover, incumbent agreements and service-review timing.
Review the sender details and selected recipient before sending.
Subject: Brindlewood — nurse-call specification and support
Hello Wrightcare team,
We install and maintain nurse-call systems, including C-TEC 800 Series and Quantec, and can assess support for most makes.
Wrightcare describes Brindlewood in Grimsargh as a 72-bedroom home under construction, targeting residents moving in during summer 2027.
Could you point us to the person responsible for this scope and confirm what is already appointed?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
If the requirement is already covered, a future review date or the right contact would be helpful.
Kind regards,
Hi-Tech Security and Fire team
info@hi-techsecurityandfire.co.uk
Privacy or contact preferences: reply to this email. Please let us know if you would prefer no further contact.
Next useful trigger
A named project buyer, confirmed package status or a published fit-out/handover update.
Crystal Care Collection · Newcastle upon Tyne, Tyne and Wear
Programme: Summer 2027 Source checked: 2026-09-28
Target scope
First establish the actual construction stage and the distinct nurse-call specification. Qualify installation or later support only after separating it from the named Sensio resident-monitoring system.
Why it fits
Crystal Care Collection’s current directory targets summer 2027 for Sparrowhill at Newcastle Great Park; the home page names Sensio RoomMate monitoring. The core territory match is Newcastle upon Tyne. For Hi-Tech Security and Fire, the relevant scope is Maintenance of supported nurse-call makes, C-TEC 800/Quantec work and proportionate wired or wireless upgrades across the North of England.
Recommended first move
Contact Crystal Care Collection via hello@crystalcarecollection.co.uk and request the development/estates lead responsible for this specific scope; the public inbox is not a confirmed buyer.
Timing
Named resident monitoring is not evidence of the fire, nurse-call or doorset package, or of an open order. Ask for the actual buying window before setting a follow-up date.
Qualification questions
Who controls the relevant Sparrowhill package, and what is already committed alongside the named resident-monitoring technology?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
Are there approved requirements for call routing, door monitoring or wireless additions, rather than an assumed full replacement?
What is the separate nurse-call scope alongside Sensio RoomMate, and are interfaces actually specified?
Prepare before contact
Prepare a supported-makes matrix distinguishing installation, servicing and programming permissions.
Prepare an example occupied-home work plan for a limited upgrade or supported maintenance transfer.
Reasons to stop
The operator/contractor confirms the full relevant scope is committed and is not considering external support.
The installed make, restricted software access or warranty terms prevent the specific maintenance or upgrade proposed.
Published buyer routes
Crystal Care Collection
Group team: ask for development or estates procurement Request the operator development or estates buyer; confirm handover, incumbent agreements and service-review timing.
Review the sender details and selected recipient before sending.
Subject: Sparrowhill — nurse-call specification and support
Hello Crystal Care Collection team,
We install and maintain nurse-call systems, including C-TEC 800 Series and Quantec, and can assess support for most makes.
Crystal Care Collection’s current directory targets summer 2027 for Sparrowhill at Newcastle Great Park; the home page names Sensio RoomMate monitoring.
Could you point us to the person responsible for this scope and confirm what is already appointed?
Is the system C-TEC 800, Quantec or another make, and what programming access is available?
If the requirement is already covered, a future review date or the right contact would be helpful.
Kind regards,
Hi-Tech Security and Fire team
info@hi-techsecurityandfire.co.uk
Privacy or contact preferences: reply to this email. Please let us know if you would prefer no further contact.
Next useful trigger
A confirmed package buyer or fit-out milestone that clarifies the separate systems and service scope.